Phonograph cylinders are the earliest commercial medium for recording and reproducing sound
. Commonly known simply as "records" in their era of greatest popularity (c. 1896–1915), these hollow cylindrical
objects have an audio recording engraved on the outside surface, which can be reproduced when they are played on a mechanical cylinder phonograph
In the 1910s, the competing disc record
system triumphed in the marketplace to become the dominant commercial audio medium.
In December 1877,
and his team invented the phonograph
using a thin sheet of tin foil
wrapped around a hand-cranked grooved metal cylinder. Tin foil was not a practical recording medium for either commercial or artistic purposes and the crude hand-cranked phonograph was only marketed as a novelty, to little or no profit. Edison moved on to developing a practical incandescent electric light and the next improvements to sound recording technology were made by others.
Following seven years of research and experimentation at their Volta Laboratory
, Charles Sumner Tainter
, Alexander Graham Bell
, and Chichester Bell
introduced wax as the recording medium and engraving, rather than indenting, as the recording method. In 1887, their "Graphophone
" system was being put to the test of practical use by official reporters of the US Congress, with commercial units later being produced by the Dictaphone Corporation
After this system was demonstrated to Edison's representatives, Edison quickly resumed work on the phonograph. He settled on a thicker all-wax cylinder, the surface of which could be repeatedly shaved down for reuse. Both the Graphophone and Edison's "Perfected Phonograph" were commercialized in 1888. Eventually, a patent-sharing agreement was signed and the wax-coated cardboard tubes were abandoned in favor of Edison's all-wax cylinders as an interchangeable standard format.
Beginning in 1889, prerecorded wax cylinders were marketed. These have professionally made recordings of songs, instrumental music or humorous monologues in their grooves. At first, the only customers for them were proprietors of nickel-in-the-slot machines—the first jukebox
es—installed in arcades and taverns, but within a few years private owners of phonographs were increasingly buying them for home use. Each cylinder can easily be placed on and removed from the mandrel
of the machine used to play them.
Unlike later, shorter-playing high-speed cylinders, early cylinder recordings were usually cut at a speed of about 120 rpm and can play for as long as 3 minutes.
They were made of a relatively soft wax formulation and would wear out after they were played a few dozen times.
The buyer could then use a mechanism which left their surfaces shaved smooth so new recordings could be made on them.
Cylinder machines of the late 1880s and the 1890s were usually sold with recording attachments. The ability to record as well as play back sound was an advantage of cylinder phonographs over the competition from cheaper disc record
phonographs which began to be mass-marketed at the end of the 1890s, as the disc system machines could be used only to play back prerecorded sound.
In the earliest stages of phonograph manufacturing, various competing incompatible types of cylinder recordings were made. A standard system was decided upon by Edison Records
, Columbia Phonograph
, and other companies in the late 1880s. The standard cylinders are about long, in diameter, and play about of music or other sound.
Over the years the type of wax used in cylinders was improved and hardened so that cylinders could be played with good quality over 100 times. In 1902 Edison Records launched a line of improved hard wax cylinders marketed as "Edison Gold Molded Records". The major development of this line of cylinders is that Edison had developed a process that allowed a mold to be made from a master cylinder which then permitted the production of several hundred cylinders to be made from the mold. The process was labeled "Gold Moulded" because of the gold vapor that was given off by gold electrodes used in the process.
Originally all cylinders sold had to be recorded live on the softer brown wax which wore out in as few as twenty playings. Later cylinders were reproduced either mechanically or by linking phonographs together with rubber tubes. Although not completely satisfactory, the result was good enough to be sold.
Cylinders were sold in cardboard tubes with cardboard caps on each end, the upper one a removable lid. Like cylindrical containers for hats, they were simply called "boxes", the word still used by experienced collectors. Within them, the earliest soft wax cylinders came swathed in a separate length of thick cotton batting. Later molded hard-wax cylinders were sold in boxes with a cotton lining. Celluloid cylinders were sold in unlined boxes. These protective boxes were normally kept and used to house the cylinders after purchase. Their general appearance allowed bandleader John Philip Sousa
to deride their contents as "canned music", an epithet he borrowed from Mark Twain
, but that did not stop Sousa's band from profiting by recording on cylinders.
The earliest cylinder boxes have a plain brown paper exterior, sometimes rubber-stamped with the company name. By the late 1890s, record companies usually pasted a generic printed label around the outside of the box, sometimes with a penciled catalog number but no other indication of the identity of the recording inside. A slip of paper stating the title and performer was placed inside the box with the cylinder. At first this information was handwritten or typed on each slip, but printed versions became more common once cylinders were sold in large enough quantities to justify the printing setup cost. The recording itself usually began with a spoken announcement of the title and performer and also the name of the record company. On a typical Edison record slip from 1903, the consumer is invited to cut off a coupon with the printed information and paste it onto the lid of the box. Alternatively, a circular area within the coupon could be cut out and pasted onto the end of a spindle for that cylinder in one of the specially built cases and cabinets made for storing cylinder records. Only a minority of cylinder record customers purchased such storage units, however. Slightly later, the record number was stamped on the lid, then later still a printed label with the title and artist information was factory-applied to the lid. Shortly after the start of the 20th century, an abbreviated version of this information was impressed into or printed on one edge of the cylinder itself.
Hard plastic cylinders
In 1900, Thomas B Lambert was granted a patent that described a process for mass-producing cylinders made from celluloid
, an early hard plastic ( of France was producing celluloid cylinders as early as 1893, but they were individually recorded rather than molded). That same year, the Lambert Company of Chicago began selling cylinder records made of the material. They would not break if dropped and could be played thousands of times without wearing out, although the choice of the bright pink color of early cylinders was arguably a marketing error. The color was changed to black in 1903, but brown and blue cylinders were also produced. The coloring was purportedly done because the dye reduced surface noise
. Unlike wax, the hard inflexible material could not be shaved and recorded over, but it had the advantage of being nearly permanent.
Such "indestructible" style cylinders are one of the most durable forms of sound recording produced in the entire era of analog audio media; they can withstand a greater number of playbacks before wearing out than later media such as the vinyl record
or audio tape
. Their only serious shortcoming is that the celluloid slowly shrinks over the years, so that if it is on a core of plaster, metal or other very unyielding material, the ever-increasing tension can ultimately cause the celluloid to split lengthwise. A typical Lambert cylinder will have shrunk by approximately 3 mm in length in the 100 years or so since its manufacture (the actual amount is very dependent on storage conditions). Thus the grooves will no longer be 100 per inch, and the cylinder will skip if played on a typical feed-screw-type machine. The diameter will also have shrunk and many such cylinders will no longer fit on the mandrel
unless very carefully reamed to fit. Such cylinders can still be played quite satisfactorily on suitable modern equipment. The Lambert company was put out of business in 1906 due to repeated actions from Edison for patent infringement, which Lambert had not actually committed – it was the cost of defending the actions that eventually sank Lambert.
This superior technology was licensed by the Indestructible Record Company in 1906 and Columbia Phonograph Company
in 1908. The Edison Bell
company in Europe had separately licensed the technology and were able to market Edison's titles in both wax (popular series) and celluloid (indestructible series). Lambert was able to license the process because the patent was not owned by the now defunct Lambert Company, but by Lambert himself.
Edison had introduced wax cylinders that played for nominally 4 minutes (instead of the usual 2) in 1909 under the ''Amberol'' brand. They were made from a harder (and more easily breakable) form of wax to withstand the smaller stylus used to play them. The longer playing time was achieved by shrinking the groove size and spacing them twice as close together. In 1912, the Edison company eventually acquired Lambert's patents to the celluloid technology, and almost immediately started production under a variation of their existing ''Amberol'' brand as ''Edison Blue Amberol Records''. These new celluloid recordings were given a core made from plaster of Paris
. The celluloid material itself was blue in color, but purple was introduced in 1919, "... for more sophisticated selections". The use of camphor in Edison's celluloid base rendered it more stable, and the plaster core provided further resistance to possible shrinkage, but the playing surface is still liable to split if stored in less than ideal conditions; however, the groove pitch rarely changes. The plaster core itself can deteriorate in conditions that are too damp or too dry. Nevertheless, most Blue Amberol cylinders are, today, quite playable on antique phonographs or modern equipment alike (although the plaster core may need some reaming).
Edison made several designs of phonographs both with internal and external horns for playing these improved cylinder records. The internal horn models were called ''Amberolas''. Edison marketed its "Fireside" model phonograph with a gearshift and a 'model K' reproducer with two styli that allowed it to play both 2-minute and 4-minute cylinders. Conversion kits were produced for some of the later model 2-minute phonographs adding a gear change and a second 'model H' reproducer. These kits were shipped with a set of 12 (wax) Amberol cylinders in distinctive orange boxes. The purchaser had no choice as to the titles.
In the era before World War I
, phonograph cylinders and disc records
competed with each other for public favor.
The audio fidelity of a sound groove is improved if it is engraved on a cylinder due to better linear tracking. This was not resolved until the advent of RIAA standards in the early 1940s—by which time it had already been rendered academic, as cylinder production stopped with Edison's last efforts in October 1929.
Advantages of cylinders
The cylinder system had certain advantages. As noted, wax cylinders could be used for home recordings, and "indestructible" types could be played over and over many more times than discs. Cylinders usually rotated twice as fast as contemporary discs, but the linear velocity was comparable to the innermost grooves of the disc. In theory, there would be generally poorer audio fidelity
. Furthermore, since constant angular velocity
translates into constant linear velocity
(the radius of the helical
track is constant), cylinders were also free from inner groove problems suffered by disc recordings. Around 1900, cylinders were, on average, indeed of notably higher audio quality than contemporary discs, but as disc makers improved their technology by 1910 the fidelity differences between better discs and cylinders became minimal.
Cylinder phonographs generally used a worm gear
to move the stylus in synchronization with the grooves of the recording, whereas most disc machines relied on the grooves to pull the stylus along. This resulted in cylinder records played a number of times having less degradation than discs, but this added mechanism made cylinder machines more expensive.
Advantages of discs
Both the disc records, and the machines to play them, were cheaper to mass-produce than the products of the cylinder system. Disc records were also easier and cheaper to store in bulk, as they could be stacked, or when in paper sleeves put in rows on shelves like books—packed together more densely than cylinder recordings.
Many cylinder phonographs used a belt to turn the mandrel; slight slippage of this belt could make the mandrel turn unevenly, thus resulting in pitch fluctuations. Disc phonographs using a direct system of gears turned more evenly; the heavy metal turntable of disc machines acted as a flywheel, helping to minimize speed wobble.
Virtually all US disc records were single-sided until 1908, when Columbia Records
began mass production of discs with recordings pressed on both sides
. Except for premium-priced classical records, that quickly became the industry standard. With their capacity effectively doubled, the storage efficiency advantage of discs over the cylinder format became even more obvious.
The disc companies had superior advertising and promotion, most notably the Victor Talking Machine Company
in the United States and the Gramophone Company
in the Commonwealth. Great singers like Enrico Caruso
were hired to record exclusively, helping put the idea in the public mind that that company's product was superior. Edison tried to get into the disc market with hill-and-dale
discs, Edison Disc Record
Cylinder records continued to compete with the growing disc record market into the 1910s, when discs won the commercial battle. In 1912, Columbia Records
, which had been selling both discs and cylinders, dropped the cylinder format, while Edison introduced his unique Diamond Disc
format. Beginning in 1915, new Edison cylinder issues were simply dubs of Edison discs and therefore had lower audio quality than the disc originals. Although his cylinders continued to be sold in steadily dwindling and eventually minuscule quantities, Edison continued to support owners of cylinder phonographs by making new titles available in that format until the company ceased manufacturing all records and phonographs in November 1929.
Cylinder phonograph technology continued to be used for Dictaphone
and Ediphone recordings for office use for decades.
In 1947, Dictaphone replaced wax cylinders with their Dictabelt
technology, which cut a mechanical groove into a plastic belt instead of into a wax cylinder. This was later replaced by magnetic tape
recording. However, cylinders for older style dictating machines continued to be available for some years, and it was not unusual to encounter cylinder dictating machines into the 1950s.
In the late 20th and early 21st century, new recordings have been made on cylinders for the novelty effect
of using obsolete technology. Probably the most famous of these are by They Might Be Giants
, who in 1996 recorded "I Can Hear You" and three other songs, performed without electricity, on an 1898 Edison wax recording studio phonograph at the Edison National Historic Site
in West Orange, New Jersey
. This song was released on ''Factory Showroom
'' in 1996 and re-released on the 2002 compilation ''Dial-A-Song: 20 Years of They Might Be Giants
''. The other songs recorded were "James K. Polk", "Maybe I Know", and "The Edison Museum", the last a song about the site of the recording. These recordings were officially released online as MP3 files in 2001.
Small numbers of cylinders have been manufactured in the 21st century out of modern long-lasting materials. Two companies engaged in such enterprise are the Vulcan Cylinder Record Company of Sheffield
, England, and the Wizard Cylinder Records Company in Baldwin, New York
. Both appear to have started in 2002.
In 2010 the British steampunk
band The Men That Will Not Be Blamed for Nothing
released the track "Sewer", from their debut album, ''Now That's What I Call Steampunk! Volume 1
'' on a wax cylinder in a limited edition of 40, of which only 30 were put on sale. The box set came with instructions on how to make your own cylinder player for less than £20. The BBC
covered the release on Television on BBC Click
, on BBC Online
, and on Radio 5 Live
In August 2010, Ash International
and PARC released the first commercially available glow in the dark phonograph cylinder, a work by Michael Esposito
and Carl Michael von Hausswolff
, entitled ''The Ghosts of Effingham''. The cylinder was released in a limited edition of 150 copies, and was produced by Vulcan Records in Sheffield, England.
In June 2017 the Cthulhu Breakfast Club podcast released a special limited wax cylinder edition of a show.
In April 2019, the podcast ''Hello Internet
'' released ten limited edition wax cylinder recordings."Wax cylinder episode"
''Hello Internet'', April 2019
Preservation of cylinder recordings
Because of the nature of the recording medium, playback of many cylinders can cause degradation of the recording. The replay of cylinders diminishes their fidelity and degrades their recorded signals. Additionally, when exposed to humidity, mold can penetrate a cylinder's surface and cause the recording to have surface noise. Currently, the only professional machine manufactured for the playback of cylinder recordings is the Archéophone player, designed by Henri Chamoux. The Archéophone is used by the Edison National Historic Site, Bowling Green State University (Bowling Green, Ohio), The Department of Special Collections, Donald C Davidson Library at The University of California, Santa Barbara, and many other libraries and archives.
Other modern plug-in mounts, each incorporating the use of a Stanton 500AL MK II magnetic cartridge, have been manufactured from time to time. Information on each may be viewed on the Phonograph Makers Pages link. It is possible to use these on the Edison cylinder players.
Also of interest is the cylinder player built by BBC engineers working in "Engineering Operations – Radio" in 1987. It was equipped with a linear-tracking arm borrowed from a contemporary Revox turntable, and a variety of re-tipped Shure SC35 cartridges.
In an attempt to preserve the historic content of the recordings, cylinders can be read with a confocal microscope and converted to a digital audio format. The resulting sound clip in most cases sounds better than stylus playback from the original cylinder. Having an electronic version of the original recordings enables archivists to open access to the recordings to a wider audience. This technique also has the potential to allow for reconstruction of damaged or broken cylinders. This method, developed by physicist Carl Haber, is known as IRENE.
Modern reproductions of cylinder and disc recordings usually give the impression that the introduction of discs was a quantum leap in audio fidelity, but this is on modern playback equipment; played on equipment from around 1900, the cylinders do not have noticeably more rumble and poorer bass reproduction than the discs. Another factor is that many cylinders are amateur recordings, while disc recording equipment was simply too expensive for anyone but professional engineers; many extremely poor recordings were made on cylinder, while the vast majority of disc recordings were competently recorded. All cylinder recordings were acoustically recorded as were early disc recordings. From the mid-1920s onward, discs started to be recorded electrically which provided a much enhanced frequency range of recording.
Also important is the quality of the material: the earliest tinfoil recordings wore out fast. Once the tinfoil was removed from the cylinder it was nearly impossible to re-align in playable condition.
In addition to poor states of preservation, the poor impression modern listeners may get of wax cylinders is from their early date, which can compare unfavorably to recordings made even a dozen years later. Other than a single playable example from 1878 (from an experimental phonograph-clock), the oldest playable preserved cylinders are from the year 1888. These include a severely degraded recording of Johannes Brahms, Handel's ''Israel in Egypt'' and a short speech by Sir Arthur Sullivan in fairly listenable condition. Somewhat later are the 1889 amateur recordings of Nina Grieg. The problem with the wax cylinders is that they readily support the growth of mildew which penetrates throughout the cylinder and, if serious enough, renders the recording unplayable. The earliest preserved rubber disc recordings are children's records, featuring animal noises and nursery rhymes. This means that the earliest disc recordings most music lovers will hear are shellac discs made after 1900, after more than ten years of development.
File:Cylinderscolors.JPG|Celluloid phonograph cylinders displaying a variety of colors
File:Cylindersdiameter.JPG|Wax phonograph cylinders in a variety of diameters
File:Cylinderslength.JPG|Wax phonograph cylinders in a variety of lengths
File:Mapleson cylinders.jpg|A sound engineer holds one of the Mapleson Cylinders containing a fragment of a live performance recorded at the Metropolitan Opera in 1901
File:Amberola close-up.jpg|Close-up of the mechanism of an Edison Amberola, manufactured circa 1915
File:Thomas Edison listening to wax cylinder, 1888.png|Thomas Edison in 1888 listening to a wax cylinder phonograph at the Edison laboratory, Orange, N.J.
File:CBS-Listening-Post-Cylinders-1941.jpg|Delivering Ediphone wax cylinder recordings of propaganda broadcasts for analysis at the CBS listening post (May 1941)
File:CBS-Listening-Post-Transcription-1941.jpg|Transcribing propaganda broadcasts from Europe recorded on Ediphone cylinders at the CBS listening post (May 1941)
Audio/video recordings of a recording and playback demonstration at the Thomas Edison National Historical Park in West Orange, New Jersey. The performers are Earl Karlsen on mandolin, Arnie Reisman on banjo, and Drew Uhlmann on fiddle, performing "Jerusalem Ridge", a bluegrass classic attributed to Bill Monroe; the operator is Jerry Fabris, Museum Curator.
* Audio format
* Audio storage
* Cylinder Audio Archive
* Mapleson Cylinders
* Volta Laboratory and Bureau
– History of phonograph cylinders; listen to many examples dating from 1878 through 1912
UCSB Cylinder Audio Archive
University of California, Santa Barbara: Streaming and downloadable versions of over 10,000 cylinders.
Vulcan Cylinder Record Company
Ethnographic wax cylinders from the British Library
Category:Audiovisual introductions in 1877
Category:Audiovisual introductions in 1888
Category:Alexander Graham Bell