thumb|right|300px|SDTV resolution by nation; countries using 480i are in green.
480i is the video
mode used for standard-definition analog
or digital television
in the Caribbean
, South Korea
, Western Sahara
, and most of the Americas
(with the exception of Argentina
, and Uruguay
). The ''480'' identifies a vertical resolution of 480 lines, and the ''i'' identifies it as an interlaced
resolution. The field rate
, which is 60 Hz
(or 59.94 Hz when used with NTSC color), is sometimes included when identifying the video mode, i.e. 480i60; another notation, endorsed by both the International Telecommunication Union
and SMPTE in SMPTE 259M
, includes the frame rate
, as in 480i/30. The other common standard, used in the other parts of the world, is 576i
In analogue contexts, this resolution is often called "525 lines". It is mandated by CCIR Systems M and J
, which are usually paired with NTSC
color - which led to the "NTSC" name being often inaccurately used to refer to this video mode. Other color encodings have also been used with System M, notably PAL-M
For analog NTSC, there are a total of 525 scanning lines per frame of which originally 483 lines were visible (241.5 visible lines per field + 21 lines of vertical blanking per field = 483 + 42 = 525 lines per frame) and later 480 (240 complete lines per field). or quad video recording systems, the math suggests 15 transverse head passes, each consisting of 16 lines of video, are required to complete one field.
A full frame consists of two fields. One field contains the odd-numbered lines and the other contains the even ones. By convention an NTSC video frame is considered to start with an even field followed by an odd field. The disparity of the line numbering compared to other systems is solved by defining the line numbering to start five equalizing pulses (or 2 and a half lines) earlier than on all other systems (including Systems A and E even though they had no equalizing pulses) on the first equalizing pulse following an active line or half line. This has the effect of placing a half line of video at the end of the even (first) field and the beginning of the odd (second field). Thus the line numbers correspond to the real lines of the video frame. On all other systems, the field was considered to start with the falling edge of the first field pulse which gave the confusing position that the odd field (first) had a half a line of video occupying the latter half of a whole line and ended with a whole line of video but half a scanning line (and vice versa for the even field). The NTSC convention solved this confusion.
For DV-NTSC only 480 lines are used. The digitally transmitted
horizontal resolution is usually 720 samples (which includes 16 samples for the horizontal sync and horizontal blanking) or 704 visible pixel
s with an aspect ratio
of 4:3 (with vertically rectangular pixels) and therefore a display resolution of 640 × 480 (VGA
); that is standard-definition television
(SDTV) with a 4:3 aspect ratio (with square pixels).Glossary - 480i
The field rate (not the frame rate) is usually (60/1.001) = 59.94 hertz for color TV and is often incorrectly rounded up to 60 Hz. There are several conventions for written shorthands for the combination of resolution and rate: 480i60, 480i/30 (EBU/SMPTE always use frame rate to specify interlaced formats) and 480/60i. 480i is usually used in countries that conventionally use NTSC (most of the Americas and Japan), because the 525 transmitted lines at 60 hertz of analogue NTSC contain 480 visible ones.
In each case of the use of the ‘60’ terminology, it is merely shorthand for 59.94, to differentiate it from 30 (29.97) or 24 (23.976).
480i can be transported by all major digital television formats, ATSC, DVB and ISDB, and on DVD.
* Enhanced-definition television (EDTV)
* List of common resolutions
* 4320p, 2160p, 1080p, 1080i, 720p, 576p, 576i, 480p, 360p, 240p